Compak In-Line kit for EP096M-RAS-RC11 November 2021
Protection Fuse Box – EP096-FP11 November 2021
For all cable connections, the Multi-Pull System uses a particular copper cable suitable for all types of connections:
- connection between the Tripods on the shooting range and the Control box or Wiring box
- data connection between the various control units in the ranges and the Data Concentrator in the control room
- connection between the Data Concentrator and the Scoreboards on the shooting ranges
- connection between Data Concentrator and all the various Interfaces for the monitors in the room
This cable is made up of two “twisted” copper wires with a metal screen and an external waterproof protection.
The section of the wires (1mmq) is sufficient for the currents involved in the system as well as to ensure sufficient strength during the wiring operations. This solution greatly simplifies installations, in fact only one model of cable is sufficient for all the most important connections, which greatly simplifies the installer’s work and allows for economic savings compared to solutions involving different types of cables.
Another not negligible advantage of this solution is represented by the fact that the cable connecting the range microphones to the control unit is single and separate from the cable used for the stand lamp or for the display. In fact, it must always be remembered that the electrical signals produced by the microphones on the shooting ranges are very weak and susceptible to being disturbed very easily.
The supply of this cable takes place in reels of about 1,000 meters each